Inpro Suction Oil Tranfer Units

  • All vacuum units are manufactured under ISO 9002 standards and certified under DIN-EN-12514-1 standard.


  • Our units are especially designed for installations where the aspiration distance represents an important consideration. Our units are safe, extremely quiet, easy to install, and highly efficient.


  • Our vacuum oil transfer units are designed for industrial and residential installations where reliability and durability are required most.






Plan Layout

General Features

  • To resolve the distance problem, our equipment is designed to work with heights of up 9 meters and horizontal distances of up to 200 meters with a broad range of possibilities within these parameters.


  • This equipment has a storage tank capacity of between 8 and 210 litres (depending upon the model. This tank is automatically managed by a double level probe system, enabling minimum, maximum and security levels to be maintained.


  • We eliminate the possibility of accidental spillage through the incorporation of up to five safety devices into our units.


  • The equipment also has a spill tray to collect possible drippings and to detect them with an infrared system, which activates an alarm.


  • INPRO Vacuum units are installed in the boiler room and they supply the oil burner via gravity.


  • The applications where this equipment can be used are diverse: supplying burners, powering generator drives, etc…


  • This enables us to minimise installation and maintenance costs.


  • Simple installation: vacuum pipes, plug base and connection to burner. It is that simple. With this equipment, you can place the tank in a location that is most convenient for you.



Spill Prevention Safety Systems (under DIN-EN-12514-1 standard):

  • High-Level sensor control switch.


  • Low-Level sensor control switch.


  • High oil temperature switch control.


  • Spill tray with incorporated leak detector.


  • Vacuum oil piping transferring system.



General features of the Vacuum Units with one and two pumps

These documents are in Adobe Acrobat 4.0 format. If you have no viewer or your viewer is not Adobe Acrobat 3.01 or higher, you can download it by clicking on this icon.

Deutsche version

Model Flow Power Tank capacity Noise Level
One Pump Two pumps L / H KW CV N GE dB
GPS-35 N GPS-30 GE 35 0,12 1/6 8 27 46
GPS-70 N GPS-70 GE 70 0,18 1/4 35 60 48
GPS-130N GPS-130 GE 130 0,25 1/3 35 60 49
GPS-350N GPS-350 GE 350 0,37 1/2 217 217 49
GPS-35 DRUCK 35 0,12 1/6 8 --- 46

Suction Units: Elevation and total length curves


Modell Menge Leistung Behälter Inhalt (lt) Rauschpegel (dB)
Eine Pumpe Zwei Pumpen L / H KW CV N GE dB
GPS-35 N GPS-30 GE 35 0,12 1/6 8 27 46
GPS-70 N GPS-70 GE 70 0,18 1/4 35 60 48
GPS-130N GPS-130 GE 130 0,25 1/3 35 60 49
GPS-350N GPS-350 GE 350 0,37 1/2 217 217 49
GPS-35 DRUCK 35 0,12 1/6 8 --- 46

Saugaggregate: Leistungskurven und Gesamtlänge



All vacuum units are manufactured under ISO 9002 Standards, and are Certified under DIN-EN-12514-1 standard.