MSVE Solenoid Valve with Manual Reset

The electric valve for gas complies with the safety requirements of all current regulations. These valves close in the absence of electricity and when activated by the gas detector.


MSVE:

  • Since it is normally open it has a manual reset and works with cold coils.


  • It closes automatically whenever no electrical current is present and whenever the gas detector is activated.


  • The reset is manual and cannot be reset unless the electrical current has been re-established.


  • It includes a system that ignores micro voltage cuts or black outs of less than 1.5 s, thus avoiding false alarms.


  • Threaded connections are available from ½" to 2" and DIN flange connection from 2 ½" to 4" in DIN


  • Maximum operating pressure: 500 mB.


<<< return

EV:

  • Manual reset, normally closed.


  • It closes automatically whenever no electrical current is present and whenever the gas detector is activated.


  • Threaded connections are available from ½" to 2" and DIN flange connection from 2 ½" to 4".


  • Maximum operating pressure: 500 mB.


<<< return

VMR:

  • No manual reset, normally closed.


  • It closes automatically whenever no electrical current is present and whenever the gas detector is activated.


  • It can be reset through remote control system.


  • Threaded connections are available from ½" to 2" and DIN flange connection from 2 ½" to 4".


  • Maximum operating pressure: 360 mB


  • For 200mB maximum operating pressure, only available in DN-65, 80 y 100 versions.


<<< return



For more information: Ficha técnica electroválvulas

These documents are in Adobe Acrobat 4.0 format. If you have no viewer or your viewer is not Adobe Acrobat 3.01 or higher, you can download it by clicking on this icon.